Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER1995NEW YORKER V6-3.5L VIN FREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON, ENGINE
1995 Chrysler New Yorker V6-3.5L VIN F
Piston, Engine
1995 Chrysler New Yorker V6-3.5L VIN FSECTION Piston, Engine
PISTONS
Type Material Aluminum With Struts
Piston to Bore Clearance (at Size Location) 0.019 - 0.051 mm
(0.0007 - 0.0020 in.)
Weight
A Size 519 - 524 grams
(18.30 - 18.48 oz.)
B Size 514 - 519 grams
(18.12 - 18.30 oz.)
Land Clearance (Diametrical) 0.508 - 0.660 mm
(0.020 - 0.026 in.)
Piston Ring Groove Diameter
No. 1 86.3 - 86.5 mm
(3.397 - 3.4055 in.)
No. 2 86.3 - 86.5 mm
(3.397 - 3.4055 in.)
No. 3 85.8 - 86.0 mm
(3.378 - 3.385 in.)
PISTON PINS
Type Full Floating
Diameter 23.997 - 24.000 mm
(0.9007-0.9009 in.)
Clearance in Piston 0.005 - 0.015 mm
(0.0002-0.0006 in.)
Clearance in Rod 0.007 - 0.018 mm
(0.0003 - 0.0007 in.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.