Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER1993LEBARON LANDAUREPAIR AND DIAGNOSIS (SINGLE PAGE)DRIVELINES & AXLESAXLE SHAFTS - FRONTREMOVAL, OVERHAUL & INSTALLATIONINTERMEDIATE SHAFT ASSEMBLYDISASSEMBLY
1993 Chrysler LeBaron Landau
Intermediate Shaft Assembly: Disassembly
1993 Chrysler LeBaron LandauSECTION Disassembly
- Mark relationship of stub axle shaft to intermediate shaft to ensure proper reassembly. Apply penetrating oil to bearing caps, and remove snap rings. Place yoke and "U" joint in vise. Use a socket and hammer to remove one "U" joint cap at a time. With all caps removed, remove cross section of "U" joint.
- Remove 2 bolts securing bearing assembly to bearing bracket. Using arbor press, carefully press stub axle from bearing assembly and outer slinger. DO NOT dent or damage slinger or end of stub shaft. If replacing slinger, carefully press shaft out through slinger.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.