Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
Using a plastic trim tool, carefully pry downward on the cover to release from windshield.
- Squeeze tabs on insert and pull apart from cover.
- Windshield Multifunction Sensor Mount Bracket Cover Insert (1) - Remove
Pull downward to completely remove the windshield multifunction sensor mount bracket cover (1) from windshield.
- Windshield Multifunction Sensor Mount Bracket Cover (1) - Remove
Release the retaining tabs.
- Front View Camera (1) - Remove
- Disconnect the electrical connector.
The windshield multifunction sensor mount bracket cover and cover insert has to be removed as a single unit from the windshield surface to prevent damage to mirror.
The windshield multifunction sensor mount bracket cover and cover insert has to be removed as a single unit from the windshield surface to prevent damage to mirror.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.