Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2025TAHOE COMMERCIAL, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSCELLULAR, ENTERTAINMENT, AND NAVIGATION - REPAIR INSTRUCTIONSREPAIR INSTRUCTIONSMOBILE TELEPHONE MICROPHONE REPLACEMENTREMOVAL PROCEDURE
2025 Chevrolet Tahoe Commercial, RWD
Removal Procedure
2025 Chevrolet Tahoe Commercial, RWDSECTION Removal Procedure
Using a flat bladed plastic trim tool, release the retaining clips.
- Roof Console Opening Trim Plate (1) - Remove
- Roof Console Bolt (2) - Remove [2x]
- Roof Console (3) - Remove
- Disconnect the electrical connectors and release the wiring harness retainers as necessary.
Disconnect the electrical connector.
- Release the retaining tabs.
- Mobile Telephone Microphone (1) - Remove
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.