Removal Procedure

2024 Chevrolet Corvette E-Ray, 2D CoupeSECTION Removal Procedure
  1. GM5281824Courtesy of GENERAL MOTORS COMPANY

    Remove the left and right body hinge pillar garnish molding (1). Body Hinge Pillar Garnish Molding Replacement

  2. GM5385607Courtesy of GENERAL MOTORS COMPANY

    Remove the left and right windshield garnish molding (2). Windshield Garnish Molding Replacement

  3. GM5281891Courtesy of GENERAL MOTORS COMPANY

    Remove the left and right instrument panel trim pad radio speaker opening cover (1). Instrument Panel Trim Pad Radio Speaker Opening Cover Replacement 

  4. GM5281904Courtesy of GENERAL MOTORS COMPANY

    Remove the left and right radio front speaker grille molding (2). Radio Front Speaker Grille Molding Replacement (Stingray and Z06) , or Radio Front Speaker Grille Molding Replacement (E-Ray)

  5. GM5281875Courtesy of GENERAL MOTORS COMPANY

    Remove the left and right instrument panel outer trim cover (1). Instrument Panel Outer Trim Cover Replacement 

  6. GM5281863Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster (2) - Remove - Instrument Panel Knee Bolster Replacement 

  7. GM5281858Courtesy of GENERAL MOTORS COMPANY

    Radio Rear Quarter Trim Panel Speaker Grille (1) - Remove - Radio Rear Quarter Trim Panel Speaker Grille Replacement (Coupe) , or Radio Rear Quarter Trim Panel Speaker Grille Replacement (Convertible)

  8. GM5281852Courtesy of GENERAL MOTORS COMPANY

    Rear Compartment Closeout Panel (1) - Remove - Rear Compartment Closeout Panel Replacement

  9. GM5281833Courtesy of GENERAL MOTORS COMPANY

    Front Floor Rear Console Side Trim Panel - Left Side (1) - Remove - Front Floor Rear Console Side Trim Panel Replacement - Left Side (LHD) (Stingray and Z06) , or Front Floor Rear Console Side Trim Panel Replacement - Left Side (LHD / HP1) (E-Ray) , or Front Floor Rear Console Side Trim Panel Replacement - Left Side (RHD) 

  10. GM5281841Courtesy of GENERAL MOTORS COMPANY

    Front Floor Rear Console Side Trim Panel - Right Side (1) - Remove - Front Floor Rear Console Side Trim Panel Replacement - Right Side (LHD) , or Front Floor Rear Console Side Trim Panel Replacement - Right Side (RHD) (Stingray and Z06) , or Front Floor Rear Console Side Trim Panel Replacement - Right Side (RHD/HP1) (E-Ray) 

  11. GM5281810Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Applique - Left Side (2) - Remove - Front Floor Console Applique Replacement - Left Side (LHD) , or Front Floor Console Applique Replacement - Left Side (RHD) 

  12. GM5281803Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel (2) - Remove - Front Floor Console Extension Panel Replacement 

  13. GM5284518Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Compartment (1) - Remove - Front Floor Console Compartment Replacement 

  14. GM5388138Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Compartment (1) - Remove - Instrument Panel Compartment Replacement 

  15. GM5387460Courtesy of GENERAL MOTORS COMPANY

    Radio Front Center Speaker Grille (1) - Remove - Radio Front Center Speaker Grille Replacement (Stingray and Z06) , or Radio Front Center Speaker Grille Replacement (E-Ray)

  16. GM5389651Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Extension (1) - Remove - Instrument Panel Extension Replacement 

  17. GM5389894Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Upper Trim Panel (1) - Remove - Instrument Panel Upper Trim Panel Replacement 

  18. GM5390848Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Pad Bolt (1) - Remove [6x]

  19. Instrument Panel Trim Pad (2) - Remove
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.