Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
- Sunroof Window - Remove - Sunroof Window Replacement
- Headlining Trim Panel - Remove - Headlining Trim Panel Replacement
- Electrical Connector @ Sunroof Window Motor - Remove
- Electrical Harness @ Sunroof Module Assembly - Remove
Drain Hose (1) @ Sunroof Module Assembly - Remove
- NOTE:
Remove the 2 center bolts last in order to help support the sunroof module assembly to the roof.
Sunroof Module Bolt (1) @ Sunroof Module Assembly - Remove [6x]
- Sunroof Module Bolt (2) @ Sunroof Module Assembly - Remove [2x]
- With the aid of an assistant, lower the sunroof module assembly and remove through the passenger side door.
A new sunroof module assembly does not include the sunroof window. You must install the old sunroof window to the new sunroof module assembly.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.