Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Installation Procedure
- Intake Manifold - Install - Intake Manifold Installation
Positive Crankcase Ventilation Tube-Left Side (1) - Install - Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (Left Side) Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (Right Side)
- Position and connect harness as necessary.
Vacuum Hose (1) @Intake Manifold - Connect
- Engine Cover - Install - Engine Cover Replacement
- Manifold Absolute Pressure Sensor - Install - Manifold Absolute Pressure Sensor Replacement
- Evaporative Emission Canister Purge Valve - Install - Evaporative Emission Canister Purge Solenoid Valve Replacement
Throttle Body Assembly (2) - Install - Throttle Body Assembly Replacement
- Preform the throttle body idle air flow compensation reset. Throttle Body Idle Air Flow Compensation Reset
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.