Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2023CAMARO SS, 2D COUPE, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSCOMPONENT CONNECTOR END VIEWS (S36-T3 (X2))COMPONENT CONNECTOR END VIEWSS64P SEAT ADJUSTER SWITCH - PASSENGER
2023 Chevrolet Camaro SS, 2D Coupe, Standard Trans
S64P Seat Adjuster Switch - Passenger
2023 Chevrolet Camaro SS, 2D Coupe, Standard TransSECTION S64P Seat Adjuster Switch - Passenger
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool |
|---|---|---|---|
| I | Not required | J-35616-4A (PU) | No Tool Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 1.5 | BU/WH | 289 | Passenger Seat Rear Vertical Motor Down Control | I | - |
| 2 | 1.5 | GN | 76 | Passenger Seat Recline Motor Forward Control | I | - |
| 3 | 1.5 | YE/WH | 296 | Passenger Seat Horizontal Motor Forward Control | I | - |
| 4 | 1.5 | GN/WH | 288 | Passenger Seat Rear Vertical Motor Up Control | I | - |
| 5 | 2.5 | BK | 2250 | Ground | I | - |
| 6 | - | - | - | Not Occupied | - | - |
| 7 | 1.5 | BU/BN | 77 | Passenger Seat Recline Motor Rearward Control | I | - |
| 8 | - | - | - | Not Occupied | - | - |
| 9 | 1.5 | YE/BU | 290 | Passenger Seat Horizontal Motor Rearward Control | I | - |
| 10 | 2.5 | RD/GY | 1042 | Battery Positive Voltage | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.