Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2023CAMARO SS, 2D CONVERTIBLE, STANDARD TRANSREPAIR AND DIAGNOSISELECTRICALGAUGESINSTRUMENT PANEL TRIM AND CONSOLE TRIMREPAIR INSTRUCTIONSFRONT FLOOR CONSOLE REPLACEMENTREMOVAL PROCEDURE
2023 Chevrolet Camaro SS, 2D Convertible, Standard Trans
Removal Procedure
2023 Chevrolet Camaro SS, 2D Convertible, Standard TransSECTION Removal Procedure
- Rear Seat Cushion - Remove - Rear Seat Cushion Removal and Installation
- Front Floor Console Extension Panel - Right Side - Remove - Front Floor Console Extension Panel Replacement - Right Side
- Front Floor Console Extension Panel - Left Side - Remove - Front Floor Console Extension Panel Replacement - Left Side
- Front Floor Console Trim Plate - Remove - Front Floor Console Trim Plate Replacement (Automatic) , or Front Floor Console Trim Plate Replacement (Manual)
Front Floor Console Bolt (1) - Remove [4x]
- Reposition the seats as necessary to access the fasteners.
Front Floor Console Bolt Access Hole Cover (1) - Open
- Front Floor Console Bracket Bolt (2) - Remove [2x]
Disconnect all electrical connectors.
- With the aid of an assistant, remove the console from the vehicle. (1)
- Transfer components as necessary.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.