SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2023CAMARO SS, 2D CONVERTIBLE, STANDARD TRANSREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIM AND INTERIOR PANELINGREPAIR INSTRUCTIONSQUARTER LOWER REAR TRIM PANEL REPLACEMENT (CONVERTIBLE)
2023 Chevrolet Camaro SS, 2D Convertible, Standard Trans

Quarter Lower Rear Trim Panel Replacement (Convertible)

2023 Chevrolet Camaro SS, 2D Convertible, Standard TransSECTION Quarter Lower Rear Trim Panel Replacement (Convertible)
GM4328807Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts items in the following chart represent components shown in graphic above.
Callout Component Name

Preliminary Procedures

  1. Front Side Door Sill Garnish Molding Replacement 
  2. Quarter Upper Trim Panel Replacement 
  3. Rear Seat Back Pad Replacement (Convertible) , or Rear Seat Back Pad Replacement (ZL1 1LE)
  4. Remove the driver or passenger seat retractor side belt anchor fastener. Front Seat Belt Retractor Replacement (Convertible)
1 Quarter Lower Rear Trim Panel

Procedure

  1. Grasp the panel and pull outward, disengaging the clips securing the panel to the vehicle.
  2. Feed the seat belts through bezel opening in the panel.
  3. Disconnect the electrical connector.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.