Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
- Remove the appropriate rear compartment side trim:
Rear Body Structure Stop Lamp Trim Panel (2) - Remove - Rear Body Structure Stop Lamp Trim Panel Replacement
- Rear Bumper Fascia - Remove - Rear Bumper Fascia Replacement (Base, Uplevel) , or Rear Bumper Fascia Replacement (ZL1)
Remove the 2 tail lamp bracket bolts (1).
Remove the 3 rear combination lamp nuts (1).
- Disconnect the electrical connector.
Remove the rear body structure stop lamp (1).
- Transfer components as necessary.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.