Rear Side Door Window Rear Guide Replacement

2022 Chevrolet Trax LT, AWDSECTION Rear Side Door Window Rear Guide Replacement
GM2780833Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the rear side door trim. Refer to Rear Side Door Trim Replacement .
1 Rear Side Door Window Rear Guide Bolt
CAUTION:

Refer to Fastener Caution .

Procedure

  1. Remove the rear side door water deflector.
  2. Do Not remove the window from the vehicle, raise the window to the full up position.
  3. Pull the weatherstrip out of the inner channel guide.

Tighten 
9 N.m (80 lb in)
2 Rear Side Door Window Rear Guide Nut
Tighten 
9 N.m (80 lb in)
3 Rear Side Door Window Rear Guide

Procedure

  1. Ensure that the window is in the front and rear guides.
  2. Carefully move the window downward in short slow intervals, while ensuring that the window remains in the guide.
  3. Inspect the window for proper operation before installing the trim.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.