Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
S39 Ignition Switch (-BTM)
2022 Chevrolet Trax LT, AWDSECTION S39 Ignition Switch (-BTM)
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool |
|---|---|---|---|
| I | Not required | J-35616-64B (L-BU) | No Tool Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | VT / BK | 3 | Run/Crank Ignition 1 Voltage | I | - |
| 2 | 0.35 | RD / YE | 5040 | Battery Positive Voltage | I | - |
| 3 | 0.35 | VT / YE | 4 | Accessory Ignition Voltage | I | - |
| 4 | 0.35 | WH / VT | 1020 | Off/Run/Crank Ignition Voltage | I | - |
| 5 | - | - | - | Not Occupied | - | - |
| 6 | 0.35 | WH / BK | 1073 | Ignition Key Resistor Signal | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.