SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2022CAMARO ZL1, 2D CONVERTIBLE, STANDARD TRANSREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIM AND PANELINGREPAIR INSTRUCTIONSFRONT SIDE DOOR ARMREST SWITCH MOUNT PLATE REPLACEMENT
2022 Chevrolet Camaro ZL1, 2D Convertible, Standard Trans

Front Side Door Armrest Switch Mount Plate Replacement

2022 Chevrolet Camaro ZL1, 2D Convertible, Standard TransSECTION Front Side Door Armrest Switch Mount Plate Replacement
GM4206718Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Front Side Door Pull Handle Cover Replacement 
1 Front Side Door Armrest Pull Cup Fastener [3x]
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5 N.m (22 lb in)
2 Front Side Door Armrest Switch Mount Plate

Procedure

  1. Using a flat-bladed plastic trim tool, start at the rear of the armrest switch mount plate and gently lift up and rearward to unhook the front retaining feature from under the front side door trim panel applique.
  2. Disconnect the electrical connectors.
  3. Transfer components as necessary.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.