3rd Row Seat Belt Retractor Replacement (Short Wheelbase)

2020 Chevrolet Tahoe LS, RWD, Gas/EthanolSECTION 3rd Row Seat Belt Retractor Replacement (Short Wheelbase)
GM3648608Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the quarter lower rear trim panel. Refer to Quarter Lower Rear Trim Panel Replacement (Left Side, Standard Wheelbase) , or Quarter Lower Rear Trim Panel Replacement (Right Side, Standard Wheelbase) .
1 3rd Row Rear Seat Shoulder Belt Anchor Plate Fastener
CAUTION:

Refer to Fastener Caution .


Tighten 
45 N.m (32 lb ft)
2 3rd Row Rear Seat Belt Retractor Upper Fastener
Tighten 
45 N.m (32 lb ft)
3 3rd Row Rear Seat Belt Retractor Lower Fastener
Tighten 
45 N.m (32 lb ft)
4 3rd Row Rear Seat Belt Retractor
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.