Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Circuit/System Description
The second row overhead display is located in the headliner. The display screen shows video from the media disc player, or an AUX input device.
The display receives power and ground from the vehicle harness. A discrete control circuit from the media disc player is used to control the power state of the display. The display receives all other video, audio, and control information via the LVDS cable.
The display contains the infrared transmitters for the wireless headphones and the remote control. During operation, the infrared transmitters may be visible as illuminated LEDs.
The wireless remote control is used to operate the system from the rear seat. Infrared signals from the remote control are received by the infrared receivers in display. The remote control can be used to turn the rear screen on or off, to change system settings, and to select the source for the screen from the media available to the infotainment system. Refer to the Owners Manual for additional information on remote control functions.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.