Chassis Control Module Replacement (Long Wheel Base)

2020 Chevrolet Express 2500 LS, 2.8L Eng VIN 1SECTION Chassis Control Module Replacement (Long Wheel Base)
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
GM4846898Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Raise and support the vehicle. Lifting and Jacking the Vehicle .
1 Chassis Control Module Nut
CAUTION:

Refer to Fastener Caution .


Tighten 
9N.m (80 lb in)
2 Chassis Control Module

Procedure

  1. Disconnect the electrical connector.
  2. If replacing the chassis control module program the module. Control Module References
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.