Removal Procedure

2020 Chevrolet Express 2500 LS, 2.8L Eng VIN 1SECTION Removal Procedure
  1. GM4849411Courtesy of GENERAL MOTORS COMPANY

    Intermediate Side Door Trim Panel (4) - Remove - Intermediate Side Door Trim Panel Replacement

  2. GM4854999Courtesy of GENERAL MOTORS COMPANY

    Intermediate Side Door Inside Handle Rod (1) - Remove

  3. Intermediate Side Door Locking Rod - Inside (2) - Remove
  4. GM4855004Courtesy of GENERAL MOTORS COMPANY

    Intermediate Side Door Locking Rod - Outside (1) - Remove

  5. Intermediate Side Door Outside Handle Rod (2) - Remove
  6. GM4855005Courtesy of GENERAL MOTORS COMPANY

    Intermediate Side Door Wiring Harness (1) - Remove

  7. GM4855002Courtesy of GENERAL MOTORS COMPANY

    Rear Side Door Latch Bolt (1) - Remove [3x]

  8. Intermediate Side Door Lock (2) - Remove
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.