Circuit/System Verification

2020 Chevrolet Express 2500 LS, 2.8L Eng VIN 1SECTION Circuit/System Verification
  1. Ignition ON.
  2. Verify the M13 Door Latch Assembly-Rear Cargo performs the LOCK and UNLOCK functions when using the S13A Door Lock Switch-Rear Cargo
    • Go to next step: If the LOCK and UNLOCK function works 
  3. Ignition OFF
  4. Verify the M13 Door Latch Assembly-Rear Cargo performs the UNLOCK function when pressing the appropriate switch on the keyless entry transmitter.
    • If the M13 Door Latch Assembly-Rear Cargo UNLOCK function does not work 

      Refer to Circuit/System Testing

    • Go to next step: If the UNLOCK function works 
  5. All OK.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.