Windshield Washer Solvent Container Replacement

2020 Chevrolet Camaro SS, 2D Coupe, Standard TransSECTION Windshield Washer Solvent Container Replacement
GM4182871Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Front Wheelhouse Liner Replacement , or Front Wheelhouse Liner Replacement (ZL1)
  2. Windshield Washer Solvent Container Filler Tube ReplacementΒ 
  3. Place a suitable drain pan under the windshield washer pump area to recover the windshield washer solvent when the windshield washer pump hose is disconnected.
1 Windshield Washer Solvent Container Bolt [2x]
CAUTION:

Refer to Fastener Caution .


TightenΒ 
6 N.m (53 lb in)
2 Windshield Washer Solvent Container

Procedure

  1. Disconnect windshield washer nozzle hose from the windshield washer pump hose.
  2. Disconnect the electrical connector.
  3. Remove the windshield washer solvent container from the vehicle.
  4. Drain the windshield washer solvent into a suitable clean container.
  5. Transfer components as necessary.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.