Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2020CAMARO SS, 2D COUPE, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSCOMPONENT CONNECTOR END VIEWS (T3 (X4) - X85 (X6))COMPONENT CONNECTOR END VIEWST12 AUTOMATIC TRANSMISSION ASSEMBLY X2
2020 Chevrolet Camaro SS, 2D Coupe, Standard Trans
T12 Automatic Transmission Assembly X2
2020 Chevrolet Camaro SS, 2D Coupe, Standard TransSECTION T12 Automatic Transmission Assembly X2
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | Not Available | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | YE/GY | 3337 | Transmission Internal Mode Switch Mode Control Y | I | - |
| 2 | 0.5 | YE/ | 3338 | Transmission Internal Mode Switch Mode Control X | I | - |
| 3 | 0.5 | YE/OG | 6358 | Output Speed Signal | I | - |
| 4 | 0.5 | WH/BU | 6254 | Transmission Input Speed Sensor Signal | I | - |
| 5 | 0.5 | VT/GN | 4510 | Transmission Intermediate Speed Signal | I | - |
| 6 | 0.5 | WH/VT | 6353 | Input Speed Signal | I | - |
| 7 | 0.5 | BN/YE | 585 | Transmission Fluid Temperature Sensor Signal | I | - |
| 8 | 0.5 | OG/ | 480 | Engine Control Vehicle Sensors 5 Volt Reference 1 | I | - |
| 9 | 0.5 | BN | 6387 | Transmission High Side Driver 1 Control | I | - |
| 10 | - | - | - | Not Occupied | - | - |
| 11 | 0.5 | WH | 6388 | Transmission High Side Driver 2 Control | I | - |
| 12 | 0.5 | BU | 4171 | Transmission Input Shaft Speed Sensor Circuit 9V Reference | I | - |
| 13 | 0.5 | GN | 4170 | Transmission Output Shaft Speed Sensor Circuit 9V Reference | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.