Power Steering Fluid Reservoir Replacement

2019 Chevrolet Trax Premier, AWDSECTION Power Steering Fluid Reservoir Replacement
GM2803353Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Front Bumper Fascia Opening Upper Cover Replacement
  2. Remove as much power steering fluid from the power steering fluid reservoir as possible.
1 Power Steering Fluid Reservoir Inlet Hose Clamp
2 Power Steering Fluid Reservoir Inlet Hose
3 Power Steering Fluid Reservoir Outlet Hose Clamp
4 Power Steering Fluid Reservoir Outlet Hose
5 Power Steering Fluid Reservoir Bolt [2x]
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
6 Power Steering Fluid Reservoir
Procedure 
Fill and bleed the power steering system. Power Steering System Bleeding 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.