Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISSTEERINGPOWER STEERING SYSTEMREPAIR INSTRUCTIONSPOWER STEERING FLUID COOLER REPLACEMENTREMOVAL PROCEDURE
2019 Chevrolet Trax Premier, AWD
Removal Procedure
2019 Chevrolet Trax Premier, AWDSECTION Removal Procedure
- Remove as much power steering fluid from the power steering fluid reservoir as possible.
- Front Bumper Fascia - Remove - Front Bumper Fascia Replacement (Trax)Front Bumper Fascia Replacement (Encore)
Power Steering Gear Outlet Hose Clamp (1) - Disengage
- Power Steering Gear Outlet Hose (2) @ Power Steering Fluid Cooler - Remove
- Remove the plastic push pin (3) from the power steering fluid cooler bracket.
Power Steering Fluid Reservoir Inlet Pipe Clamp (1) - Disengage
- Power Steering Fluid Reservoir Inlet Pipe (2) @ Power Steering Fluid Cooler - Remove
Power Steering Fluid Cooler Bracket Nut (1) - Remove [2x]
- Remove the power steering fluid cooler (2) from the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.