Low Frequency Rear Bumper Antenna Replacement

2019 Chevrolet Trax Premier, AWDSECTION Low Frequency Rear Bumper Antenna Replacement
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
GM4451172
Callout Component Name

Preliminary Procedures

  1. Rear Bumper Fascia Replacement (Chevrolet)Rear Bumper Fascia Replacement (Buick)
  2. Disconnect the electrical connector.
1 Rivet
WARNING:

Refer to Eye Protection Warning .


Procedure 
Drill out the rivet.
2 Low Frequency Rear Bumper Antenna
Procedure 
Release the retaining tab.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.