SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 92 (DRIVER ASSISTANCE SYSTEMS)DESCRIPTION AND OPERATIONLANE CHANGE ALERT DESCRIPTION AND OPERATIONFEATURE LIMITATIONS
2019 Chevrolet Trax Premier, AWD

Feature Limitations

2019 Chevrolet Trax Premier, AWDSECTION Feature Limitations
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

LCA does not alert the driver to vehicles outside of the system detection zones, pedestrians, bicyclists, or animals. It may not provide alerts when changing lanes under all driving conditions. Failure to use proper care when changing lanes may result in injury, death, or vehicle damage. Before making a lane change, always check mirrors, glance over your shoulder, and use the turn signals.

  • Lane Change Alert displays may not come on when passing a vehicle quickly, for a stopped vehicle, or when towing a trailer.
  • Lane Change Alert may alert to objects attached to the vehicle, such as a trailer, bicycle, or object extending out to either side of the vehicle. Attached objects may also interfere with the detection of vehicles.
  • Lane Change Alert may not always alert the driver to vehicles in the next lane over, especially in wet conditions or when driving on sharp curves.
  • The system may light up due to guardrails, signs, trees, shrubs, and other non-moving objects.
  • Lane Change Alert may not operate when the B218L Side Object Sensor Module - Left or B218R Side Object Sensor Module - Right sensors in the corners of the rear bumper are covered with mud, dirt, snow, ice, or slush, or in heavy rainstorms.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.