Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Installation Procedure
2019 Chevrolet Trax Premier, AWDSECTION Installation Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Instrument Panel Upper Trim Panel (1) - Install
- CAUTION:
Refer to Fastener Caution .
Instrument Panel Retainer Bolt (1) - Install and tighten [4x] 2.5 N.m (22 lb in)
Instrument Panel Retainer Bolt (1) - Install and tighten [15x] 2.5 N.m (22 lb in)
- Airbag Instrument Panel Module - Install - Airbag Instrument Panel Module Replacement
- Side Window Defogger Outlet Duct - Right Side - Install - Side Window Defogger Outlet Duct Replacement - Right Side (Buick)
- Side Window Defogger Outlet Duct - Left Side - Install - Side Window Defogger Outlet Duct Replacement - Left Side (Buick)
- Windshield Defroster Outlet Duct - Install - Windshield Defroster Outlet Duct Replacement (Buick)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.