Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 84 (HYDRAULIC BRAKE SYSTEM)SPECIFICATIONSFASTENER SPECIFICATIONS
2019 Chevrolet Trax Premier, AWD
Fastener Specifications
2019 Chevrolet Trax Premier, AWDSECTION Fastener Specifications
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Hose Fitting Bolt | 40 N.m (30 lb ft) |
| Brake Pedal Assembly Upper Bolt | 9 N.m (80 lb in) |
| Brake Pedal Bracket Nut | 9 N.m (80 lb in) |
| Brake Pedal Nut | 19 N.m (14 lb ft) |
| Brake Pedal Release Bracket Bolt | 22 N.m (16 lb ft) |
| Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Master Cylinder Nut | 19 N.m (14 lb ft) |
| Power Brake Booster Pump Bracket Nut - M4P | 58 N.m (43 lb ft) |
| Power Brake Booster Pump Bracket Nut - MNH, MNK, MR5 | 22 N.m (16 lb ft) |
| Power Brake Booster Pump Nut | 7 N.m (62 lb in) |
| Power Vacuum Brake Booster Bolt | 19 N.m (14 lb ft) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.