Engine Coolant Thermostat Housing Replacement (LE2)

2019 Chevrolet Trax Premier, AWDSECTION Engine Coolant Thermostat Housing Replacement (LE2)
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
GM4248011
Callout Component Name
Preliminary Procedure 
Radiator Outlet Hose Replacement (LUV) Radiator Outlet Hose Replacement (2H0) Radiator Outlet Hose Replacement (LE2) @Engine Coolant Thermostat Housing - Disconnect
1 Engine Coolant Thermostat Housing Bolt[2x]
CAUTION:

Refer to Fastener Caution .


Tighten 
10 N.m (89 lb in)
2 Gasket
Procedure 
Install a NEW gasket.
3 Engine Coolant Thermostat Housing
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.