Rear Window Wiper Blade Replacement

2019 Chevrolet Trax Premier, AWDSECTION Rear Window Wiper Blade Replacement
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
GM2844476
Callout Component Name
1 Rear Window Wiper Blade Assembly

Procedure

  1. Remove the rear window wiper arm cover.
  2. Lift the rear window wiper arm away from the rear liftgate window.
  3. Depress the tab under the wiper blade and pull the blade from the wiper arm sheep hook.
  4. Rotate slightly the bottom edge of the rear window wiper blade away from the underside of the arm.
  5. Remove the rear window wiper blade from the inside radius of the rear window wiper arm.
  6. On reinstallation the wiper blade is fully secured to the wiper arm when an audible click noise is heard.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.