SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 55 (INTERIOR TRIM AND INTERIOR PANELING)REPAIR INSTRUCTIONSLIFTGATE UPPER SIDE TRIM FINISH PANEL REPLACEMENT
2019 Chevrolet Trax Premier, AWD

Liftgate Upper Side Trim Finish Panel Replacement

2019 Chevrolet Trax Premier, AWDSECTION Liftgate Upper Side Trim Finish Panel Replacement
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
GM2788728
Callout Component Name

Preliminary Procedure

  1. Remove the liftgate upper center trim finish panel. Refer to Liftgate Upper Center Trim Finish Panel Replacement .
  2. Remove the luggage shade pivot. Refer to Luggage Shade Pivot Replacement (Body Side) Luggage Shade Pivot Replacement (Luggage Shade) Luggage Shade Pivot Replacement (Liftgate) .
1 Liftgate Upper Side Trim Finish Panel Assembly (Qty: 2)
Procedure 
The outboard lower end of the liftgate upper side trim finish panel snaps into the liftgate lower trim finish panel.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.