S48D Multifunction Switch 2 - Instrument Panel

2019 Chevrolet Trax Premier, AWDSECTION S48D Multifunction Switch 2 - Instrument Panel
WARNING: This page is about a different car, the 2018 Chevrolet Trax. However, it is still accessible from the selected car via links, so may be relevant.
GM4326247
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 5-968291-2
  • Service Connector: 19354410
  • Description: 6-Way F 0.64 Micro-Quadlock Series (GN)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-64B (LT BU) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5 WH 6816 Indicator Dimming Control I -
2 0.35 WH 3152 Lane Departure Warning Indicator Control I UFL
3 0.5 BK 1450 Ground I UFL
4 0.5 YE 6817 LED Backlight Dimming Control I UFL
5 0.5 GY/WH 3153 Lane Departure Warning Disable Switch Signal I UFL
6 - - - Not Occupied - -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.