K35 Ignition Coil Module (2H0)

2019 Chevrolet Trax Premier, AWDSECTION K35 Ignition Coil Module (2H0)
WARNING: This page is about a different car, the 2018 Chevrolet Trax. However, it is still accessible from the selected car via links, so may be relevant.
GM2474734
Connector Part Information
  • Harness Type: Engine
  • OEM Connector: PPI0000888
  • Service Connector: 19368190
  • Description: 7-Way F 1.5 DCS-2 Series, Sealed (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-14 (GN) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Function Terminal Type ID Option
A 0.75 VT/BU 5291 Powertrain Main Relay Fused Supply 2 I -
B 0.75 BK 250 Ground I -
C 0.5 BK/BU 2129 Ignition Control Low Reference Bank 1 I -
D 0.5 BU/VT 2121 Ignition Control 1 I -
E 0.5 BU/WH 2122 Ignition Control 2 I -
F 0.5 GN/BU 2123 Ignition Control 3 I -
G 0.5 YE/BU 2124 Ignition Control 4 I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.