Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
P17 Info Display Module X1 (IO5/IO6)
2019 Chevrolet Trax Premier, AWDSECTION P17 Info Display Module X1 (IO5/IO6)
WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575742 | J-35616-64B (LT BU) | J-38125-215A | SAIT-A03T-M064 | Yazaki 14 | P | P |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | RD/VT | 5340 | Battery Positive Voltage | I | - |
| 2 | - | - | - | Not Occupied | - | - |
| 3 | 0.35 | GY/GN | 1102 | Low Speed GMLAN Serial Data #2 | I | - |
| 4 | - | - | - | Not Occupied | - | - |
| 5 | 0.35 | GN/BU | 7532 | Local Interconnect Network Serial Data Bus 10 | I | - |
| 6 - 7 | - | - | - | Not Occupied | - | - |
| 8 | 0.35 | GN/WH | 7527 | Local Interconnect Network Serial Data Bus 5 | I | - |
| 9 | - | - | - | Not Occupied | - | - |
| 10 | 0.35 | BK | 1750 | Ground | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.