Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
K73 Telematics Communication Interface Control Module X1
2019 Chevrolet Trax Premier, AWDSECTION K73 Telematics Communication Interface Control Module X1
WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575740 | J-35616-16 (LT GN) | J-38125-559 | 15445905 | Delphi 23 | J | J |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | GY/GN | 1102 | Low Speed GMLAN Serial Data #2 | I | - |
| 2 | 0.35 | BN/WH | 2517 | Keypad Red LED Control | I | - |
| 3 | 0.35 | YE/VT | 2516 | Keypad Green LED Control | I | - |
| 4 - 5 | - | - | - | Not Occupied | - | - |
| 6 | 0.35 | GN/BK | 2515 | Keypad Control | I | - |
| 7 | 0.35 | BK/WH | 2551 | Signal Ground | I | - |
| 8 - 9 | - | - | - | Not Occupied | - | - |
| 10 | 0.35 | BU/GN | 1304 | High Speed GMLAN Serial Data (+)9 | I | - |
| 11 | 0.35 | GN/WH | 2514 | Keypad Signal | I | - |
| 12 | 0.35 | WH/GN | 1305 | High Speed GMLAN Serial Data (-)9 | I | - |
| 13 | 0.5 | BK/VT | 5167 | Battery Backup Low Reference | I | - |
| 14 | 0.5 | YE/VT | 5235 | Battery Backup Control | I | - |
| 15 | 0.35 | RD/GN | 742 | Battery Positive Voltage | I | - |
| 16 | - | - | - | Not Occupied | - | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.