Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Steering Column Lock Control Module Replacement (Chevrolet)
2019 Chevrolet Trax Premier, AWDSECTION Steering Column Lock Control Module Replacement (Chevrolet)
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
Preliminary Procedure
|
|
| 1 | Steering Column Lock Control Module Bolt- Rear[2x]
CAUTION:
Refer to Fastener Caution . Tighten 14.5 N.m (11 lb ft) |
| 2 | Steering Column Lock Control Module Bolt - Side [2x] Tighten 9 N.m (80 lb in) |
| 3 | Steering Column Lock Control Module Procedure Program the steering column lock control module. Control Module References |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.