SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 109 (REAR SUSPENSION SYSTEM)REPAIR INSTRUCTIONSREAR SPRING REPLACEMENT
2019 Chevrolet Trax Premier, AWD

Rear Spring Replacement

2019 Chevrolet Trax Premier, AWDSECTION Rear Spring Replacement
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
GM2500313
Callout Component Name
Preliminary Procedure 
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1 Rear Spring

Procedure

  1. If removing the rear spring to service other suspension components, note the position of the rear spring in the relationship to the insulators.
  2. Support the rear axle with a hydraulic jack stand.
  3. Remove the lower rear shock absorber bolt. Refer to Shock Absorber Replacement .
2 Upper Rear Spring Insulator.
NOTE:

Ensure that the rear spring insulator is properly seated in the rear frame rail.
3 Lower Rear Spring Insulator
NOTE:

Ensure that the rear spring insulator is properly seated in the rear axle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.