Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 101 (PARKING BRAKE SYSTEM)REPAIR INSTRUCTIONSPARKING BRAKE LEVER REPLACEMENT (DISC BRAKE)INSTALLATION PROCEDURE
2019 Chevrolet Trax Premier, AWD
Installation Procedure
2019 Chevrolet Trax Premier, AWDSECTION Installation Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- While installing the front cable threaded rod to the parking brake lever assembly, install the parking brake lever assembly to the vehicle.
- CAUTION:
Refer to Fastener Caution .
Install the parking brake lever mounting nuts (1) and tighten to 22 N.m (16 lb ft).
- Connect the electrical connector to the parking brake indicator switch.
Loosely install the adjusting nut (1) to front cable threaded rod.
- Adjust the parking brake cable tension. Refer to Parking Brake Adjustment (Disc Brake) Parking Brake Adjustment (Drum Brake) .
- Install the front floor console. Refer to Front Floor Console Replacement (Buick)Front Floor Console Replacement (Chevrolet) .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.