Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 101 (PARKING BRAKE SYSTEM)REPAIR INSTRUCTIONSPARKING BRAKE INDICATOR SWITCH REPLACEMENTREMOVAL PROCEDURE
2019 Chevrolet Trax Premier, AWD
Removal Procedure
2019 Chevrolet Trax Premier, AWDSECTION Removal Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front floor console assembly. Refer to Front Floor Console Replacement (Buick)Front Floor Console Replacement (Chevrolet) .
- Ensure that the park brake lever is in the fully released position.
- Disconnect the electrical connector from the parking brake indicator switch.
Remove the parking brake indicator switch bolt (1).
Remove the parking brake indicator switch (1).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.