Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1 (HEATING SYSTEM, VENTILATION SYSTEM, AND AIR CONDITIONING SYSTEM)REPAIR INSTRUCTIONSAUXILIARY HEATER CORE REPLACEMENT (BUICK WITH C32)REMOVAL PROCEDURE
2019 Chevrolet Trax Premier, AWD
Removal Procedure
2019 Chevrolet Trax Premier, AWDSECTION Removal Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Front Floor Console Extension Panel - Right Side - Remove - Front Floor Console Extension Replacement - Right Side
- Instrument Panel Lower Trim Panel Insulator - Remove - Instrument Panel Lower Trim Panel Insulator Replacement (Chevrolet)Instrument Panel Lower Trim Panel Insulator Replacement (Buick)
- Instrument Panel Compartment - Remove - Instrument Panel Compartment Replacement
- Floor Front Air Outlet Duct - Remove - Floor Front Air Outlet Duct Replacement - Right Side , or Floor Front Air Outlet Duct Replacement - Left Side (Chevrolet) Floor Front Air Outlet Duct Replacement - Left Side (Buick)
Remove the instrument panel lower air bag bracket front bolts (1) [5x].
- Remove the instrument panel lower air bag bracket side bolts (2) [4x].
- Remove the instrument panel lower air bag bracket (3).
Un-clip the auxiliary heater core electrical harness from the heater core tube cover.
- Disconnect the auxiliary heater core electrical connectors.
- Auxiliary Heater Core Screw(1) - Remove[2x]
Auxiliary Heater Core(1) - Remove
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.