Removal Procedure

2019 Chevrolet Trax Premier, AWDSECTION Removal Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Recover the refrigerant. Refrigerant Recovery and Recharging (R-134a)Β 
  2. Air Cleaner Outlet Duct Replacement - Remove
  3. GM4117065

    Air Conditioning Compressor Hose Nut(1) - Remove

  4. Air Conditioning Compressor Hose(2) - Remove
  5. Remove and DISCARD the sealing washer.(3)
  6. GM2790881

    Front Compartment Front Center Insulator Replacement (4) - Remove

  7. GM4116958

    Air Conditioning Compressor Hose Bolt(3) - Remove

  8. Air Conditioning Compressor Hose(1) - Remove
  9. Remove and DISCARD the sealing washer.(2)
  10. Remove the air conditioning compressor hose from the vehicle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.