Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISENGINE MECHANICALSTARTERBATTERY, CHARGING SYSTEM AND STARTING SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESSYMPTOMS - STOP/START SYSTEMNOTES
2019 Chevrolet Trax Premier, AWD
Symptoms - Stop/Start System: Notes
2019 Chevrolet Trax Premier, AWDSECTION Notes
NOTE:
The following steps must be completed before using the symptom lists.
- Perform the Diagnostic System Check prior to using this diagnostic procedure:Diagnostic System Check - Vehicle
- Verify that no DTCs are set.
- The control modules can communicate via the serial data link.
- Review the system description and operation in order to familiarize yourself with the system functions.-Refer to: Stop/Start System Description and Operation (KL9 with LE2) .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.