Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSCOMPONENT CONNECTOR END VIEWS (Q17A LE2 - X85) (TRAX)COMPONENT CONNECTOR END VIEWS - TRAXS79D WINDOW SWITCH - DRIVER
2019 Chevrolet Trax Premier, AWD
S79D Window Switch - Driver
2019 Chevrolet Trax Premier, AWDSECTION S79D Window Switch - Driver
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | BK | 750 | Ground 7 | I | - |
| 2 | 0.35 | GN | 3381 | Window Switch Driver Express Signal | I | - |
| 3 | 0.35 | GY | 3380 | Driver Window Main Control Down Switch Signal | I | - |
| 4 | 0.5 | RD/VT | 6340 | Secondary Fused Battery Positive Voltage 63 | I | - |
| 5 | 0.5 | GN/YE | 6134 | Body Control Module LIN Bus 3 | I | - |
| 6 | 0.35 | GN/WH | 3379 | Window Switch Driver Up Signal | I | - |
| 7 | 0.35 | WH/VT | 3270 | Driver Door Lock Motor Status Signal | I | - |
| 8 | 0.35 | BU/VT | 1124 | Door Lock Key Switch Unlock Signal | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.