Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSCOMPONENT CONNECTOR END VIEWS (K36 X2 - Q17A) (TRAX)COMPONENT CONNECTOR END VIEWS - TRAXK61 SUNROOF CONTROL MODULE (CF5)
2019 Chevrolet Trax Premier, AWD
K61 Sunroof Control Module (CF5)
2019 Chevrolet Trax Premier, AWDSECTION K61 Sunroof Control Module (CF5)
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 19331559 | J-35616-35 (VT) | J-38125-215A | Not Available | Not Available | Not Available | Not Available |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 1 | RD/WH | 2740 | Secondary Fused Battery Positive Voltage 27 | I | - |
| 2 | 1 | BK | 850 | Ground 8 | I | - |
| 3 | 0.5 | BK/GY | 128 | Sunroof Switch Low Reference | I | - |
| 4 | 0.5 | GN/BN | 6132 | Body Control Module LIN Bus 1 | I | - |
| 5 | 0.5 | BU/VT | 5027 | Sunroof Switch Serial Data 1 Signal | I | - |
| 6 | 0.5 | WH/GN | 3031 | Sunroof Vent Switch Signal | I | - |
| 7 - 12 | - | - | - | Not Occupied | - | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.