K9 Body Control Module X6

2019 Chevrolet Trax Premier, AWDSECTION K9 Body Control Module X6
GM2537272Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 2098067-5
  • Service Connector: 13576035
  • Description: 27-Way F 0.64, 2.8 Series (PK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 13575578 J-35616-35 (VT) J-38125-553 Not Available Not Available Not Available Not Available
II 13582297 J-35616-64B (LT BU) J-38125-215A Not Available Not Available Not Available Not Available
III 13582326 J-35616-35 (VT) J-38125-553 8100-4444 Sumitomo 22 2 A
Pin Size Color Circuit Function Terminal Type ID Option
1 1.5
0.75
GY
GY
5911
5911
Door Lock Actuator Lock Control 2
Door Lock Actuator Lock Control 2
I
III
N08
-N08
2 1.5 GY 295 Door Lock Actuator Lock Control I -
3 1.5 BK 550 Ground 5 I -
4 1.5 BN/YE 294 Door Lock Actuator Unlock Control I -
5 0.35 VT/GY 1303 Liftgate Ajar Switch Signal 1 II -
6 0.35 WH/VT 3270 Driver Door Lock Motor Status Signal II -
7 - 9 - - - Not Occupied - -
10 0.5 GN/YE 6134 Body Control Module LIN Bus 3 II -
11 - 13 - - - Not Occupied - -
14 0.35 BU 1111 Stop/Start Switch Signal II -
15 0.35 YE/BU 5797 Rear Closure Handle Switch Open Signal II -
16 0.35 GN/BN 6132 Body Control Module LIN Bus 1 II -
17 - - - Not Occupied - -
18 0.5 BU 2500 High Speed GMLAN Serial Data [+] 1 II -
19 0.5 WH 2501 High Speed GMLAN Serial Data [-] 1 II -
20 - 23 - - - Not Occupied - -
24 0.5 BU 2500 High Speed GMLAN Serial Data [+] 1 II -
25 0.5 WH 2501 High Speed GMLAN Serial Data [-] 1 II -
26 - - - Not Occupied - -
27 0.35 GY 747 Left Rear Door Ajar Switch Signal II -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.