K9 Body Control Module X4

2019 Chevrolet Trax Premier, AWDSECTION K9 Body Control Module X4
GM2537270Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 2098067-3
  • Service Connector: 13576033
  • Description: 26-Way F 0.64, 2.8 Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 13582297 J-35616-64B (LT BU) J-38125-215A Not Available Not Available Not Available Not Available
II 19366999 J-35616-35 (VT) J-38125-553 8100-4443 Sumitomo 22 E A
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5
0.5
GN
YE
3289
312
Right Headlamp Low Beam Relay Control
Right Headlamp Low Beam Control
II
II
T3S
-T3S
2 0.5
0.5
GY
YE
3288
712
Left Headlamp Low Beam Relay Control
Left Headlamp Low Beam Control
II
II
T3S
-T3S
3 0.5 GN/VT 1315 Right Front Turn Signal Lamp Control II -
4 0.5 BU/VT 1335 Right Rear Turn Signal Lamp Control 2 II -
5 0.5 GY/BN 309 Right Park Lamp Control I -
6 0.5 VT/GY 709 Left Park Lamp Control I -
7 0.5 GY/YE 7542 Left Rear Stop Lamp Control I -
8 - - - Not Occupied - -
9 0.35 GY/VT 3264 Battery Saver Relay Close Control I -
10 0.35 YE 5420 Rear Wiper Motor Relay Coil Control I -
11 0.35 VT/WH 5065 Stop Lamp Relay Coil Control I -
12 0.35 GY/VT 755 Retained Accessory Power Relay Coil Control I -
13 0.35 GN/YE 6846 Rear License Plate Lamp Control I -
14 0.35 BN/GY 2268 Windshield Washer Relay Control I -
15 0.5 GN/VT 5199 Run/Crank Relay Coil Control I -
16 0.35 GY 91 Windshield Wiper Motor Relay Coil Control I -
17 0.35 BN/GN 196 Windshield Wiper Motor Park Switch Signal I -
18 0.35 WH/YE 5075 Current Sensor Signal I -
19 - - - Not Occupied - -
20 0.35 RD/GY 2840 Secondary Fused Battery Positive Voltage 28 I -
21 0.35 BU/VT 5076 Current Sensor Voltage Reference I -
22 0.5 VT/YE 5985 Accessory Wake-Up Serial Data I -
23 0.5 WH/BU 5986 Serial Data Communication Enable I -
24 0.35 BN/GN 109 Hood Ajar Switch Signal I -
25 - - - Not Occupied - -
26 0.5 BK/WH 351 Ground 3 I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.