Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSCOMPONENT CONNECTOR END VIEWS (B68B - K9 X7) (TRAX)COMPONENT CONNECTOR END VIEWS - TRAXK9 BODY CONTROL MODULE X2
2019 Chevrolet Trax Premier, AWD
K9 Body Control Module X2
2019 Chevrolet Trax Premier, AWDSECTION K9 Body Control Module X2
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575578 | J-35616-35 (VT) | J-38125-553 | Not Available | Not Available | Not Available | Not Available |
| II | 13582297 | J-35616-64B (LT BU) | J-38125-215A | Not Available | Not Available | Not Available | Not Available |
| III | 13582326 | J-35616-35 (VT) | J-38125-553 | 8100-4444 | Sumitomo 22 | 2 | A |
| IV | 19366999 | J-35616-35 (VT) | J-38125-553 | 8100-4443 | Sumitomo 22 | E | A |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | RD/GN | 5140 | Secondary Fused Battery Positive Voltage 51 | IV | - |
| 2 | 0.75 | BK/WH | 2351 | Ground 23 | III | - |
| 3 | 0.5 | RD/GY | 5540 | Secondary Fused Battery Positive Voltage 55 | IV | - |
| 4 | 1.5 | RD/YE | 5840 | Secondary Fused Battery Positive Voltage 58 | I | - |
| 5 | - | - | - | Not Occupied | - | - |
| 6 | 0.35 | GN | 1110 | Stop/Start Indicator Control | II | - |
| 7 | 0.5 0.35 |
BU/YE BU/YE |
5361 5361 |
Brake Apply Sensor Signal Brake Apply Sensor Signal |
II II |
MM1 MM3 |
| 8 | 0.5 | YE | 6817 | LED Backlight Dimming Control 1 | II | - |
| 9 | 0.35 | YE/GY | 44 | Instrument Panel Lamp Dimmer Switch Signal | II | - |
| 10 | 0.35 | WH/BU | 278 | Ambient Light Sensor Signal | II | - |
| 11 | 0.35 | VT/YE | 5526 | Tap Up/Down Switch Signal | II | MM1 |
| 12 | 0.35 | BN/BU | 391 | Rear Window Wiper Switch Signal | II | - |
| 13 | 0.5 0.35 |
WH WH |
5359 5359 |
Brake Apply Sensor Voltage Reference Brake Apply Sensor Voltage Reference |
II II |
MM1 MM3 |
| 14 | 0.35 | BU/VT | 1788 | Traction Control Switch Signal 1 | II | - |
| 15 | 0.35 | BN/WH | 781 | Driver Door Lock Switch Unlock Signal | II | - |
| 16 | 0.35 | GY | 3273 | Remote Control Door Lock Receiver Low Reference | II | - |
| 17 | 0.35 | BU/GN | 5723 | Ignition Mode Switch Mode Voltage | II | - |
| 18 | - | - | - | Not Occupied | - | - |
| 19 | 0.35 | BN/YE | 780 | Driver Door Lock Switch Lock Signal | II | - |
| 20 | - | - | - | Not Occupied | - | - |
| 21 | 0.35 | GN/GY | 6135 | Body Control Module LIN Bus 4 | II | - |
| 22 | 0.35 | GN | 5060 | Low Speed GMLAN Serial Data | II | - |
| 23 | 0.5 | WH | 2501 | High Speed GMLAN Serial Data [-] 1 | II | - |
| 24 | 0.5 | BU | 2500 | High Speed GMLAN Serial Data [+] 1 | II | - |
| 25 | 0.35 | GY/WH | 3272 | Remote Control Door Lock Receiver Control | II | - |
| 26 | 0.35 | GN/WH | 111 | Hazard Warning Switch Signal | II | - |
| 27 | 0.35 | BU/WH | 3275 | Remote Control Door Lock Receiver Receive Signal | II | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.