Circuit/System Description

2019 Chevrolet Trax Premier, AWDSECTION Circuit/System Description

For an overview of the component/system, refer to: Power Windows Description and OperationΒ 

Circuit Description
B+ - M74D Window Motor - Driver Supplied from a fuse.
B+ - M74P Window Motor - Passenger Supplied from a fuse.
B+ - S79LR Window Switch - Left Rear Supplied from a fuse.
B+ - S79RR Window Switch - Right Rear Supplied from a fuse.
Signal - Down @ M74D Window Motor - Driver The output circuit is switched to ground to activate the component.
Signal - Up @ M74D Window Motor - Driver The output circuit is switched to ground to activate the component.
Signal - Express @ M74D Window Motor - Driver The output circuit is switched to ground to activate the component.
Control - Up @ M74P Window Motor - Passenger The output circuit is switched from ground to 12 V to activate the component.
Control - Down @ M74P Window Motor - Passenger The output circuit is switched from ground to 12 V to activate the component.
Control - Up @ M74LR Window Motor - Left Rear The output circuit is switched from ground to 12 V to activate the component.
Control - Down @ M74LR Window Motor - Left Rear The output circuit is switched from ground to 12 V to activate the component.
Control - Up @ M74RR Window Motor - Right Rear The output circuit is switched from ground to 12 V to activate the component.
Control - Down @ M74RR Window Motor - Right Rear The output circuit is switched from ground to 12 V to activate the component.
Ground Chassis Ground
Component Description
S79D Window Switch - Driver The S79D sends a serial data message to the K9 indicating the M74 function that has been requested.
M74 Window Motor The motor M74 is a bidirectional DC motor that moves the component: Front Power Windows & Rear Power Windows
S79P Window Switch - Passenger The switch has a normally open contact.
S79LR Window Switch - Left Rear The switch has a normally open contact.
S79RR Window Switch - Right Rear The switch has a normally open contact.
K9 Body Control Module The module controls various vehicle functions like lighting, central door locking, power windows, etc.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.