SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TRAX PREMIER, AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTWIPER/WASHER SYSTEMSWIPER SYSTEM AND WASHER SYSTEMREPAIR INSTRUCTIONSWINDSHIELD WIPER BLADE REPLACEMENT
2019 Chevrolet Trax Premier, AWD

Windshield Wiper Blade Replacement

2019 Chevrolet Trax Premier, AWDSECTION Windshield Wiper Blade Replacement
GM2844474Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Windshield Wiper Blade Assembly

Procedures

  1. Lift the windshield wiper arm off the windshield to the service up position.
  2. Depress the windshield wiper arm tab at the small square hole in the windshield wiper arm.
  3. Rotate the windshield wiper blade slightly downward and slide the windshield wiper blade assembly from the windshield wiper arm.
  4. Gently return the windshield wiper arm to the windshield.
  5. Install a new windshield wiper blade.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.