Radio Bracket Replacement (IOA)

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION Radio Bracket Replacement (IOA)
WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
GM4901785Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Instrument Panel Center Molding Replacement
  2. Front Floor Console Cover Replacement (Automatic Transmission)Front Floor Console Cover Replacement (Manual Transmission)
  3. Remove the 4 heater and air conditioning control bolts from the heater and air conditioning control. Heater and Air Conditioning Control with Cable Control Replacement
1 Radio Bracket Bolt5
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5 N.m (22 lb in)
2 Radio Bracket
Procedure 
Transfer components as necessary.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.