SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TAHOE LS, 4WD, GAS/ETHANOLREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 89 (DRUM BRAKE SYSTEM)SPECIFICATIONSDRUM BRAKE COMPONENT SPECIFICATIONS
2019 Chevrolet Tahoe LS, 4WD, Gas/Ethanol

Drum Brake Component Specifications

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION Drum Brake Component Specifications
WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Brake Drum Diameter - Discard 231.0 mm 9.094 in
Brake Drum Diameter - New 230.0 mm 9.055 in
Brake Drum Maximum Allowable Radial Runout 0.04 mm 0.002 in
Brake Drum Maximum Allowable Scoring 0.50 mm 0.02 in
Brake Drum Maximum Diameter After Refinish 230.75 mm 9.085 in
Brake Shoe Lining Minimum Thickness 1.40 mm 0.055 in
Brake Shoe Lining Thickness - New 5.00 mm 0.197 in
Brake Shoe Lining-to-Drum Clearance 0.40-0.90 mm 0.016-0.035 in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.